Nail Equipment
|
|
|
|
Feature |
|
The body is light and the speed is adjustable , it can be forward and reverse using. The low noise design makes it a nice experience to grind your nails. Use this tool to grind your nails and make your nails smooth and beautiful. |
|
|
|
Instruction |
|
1 Fix the shaft center and turn the power on to the I position. 2. Adjust the shift lever to the speed you need. 3. The right and reverse buttons on the right can be adjusted. When you want to switch the steering, you must first pass the middle O position. Let the body get the message of changing the steering to avoid overloading the device. 4. overload The overload warning red light will only illuminate in the following two conditions, and the automatic power off protects your machine. a - when the machine is used for too long. b - When switching between forward and reverse, it is too fast, resulting in no intermediate O position. The machine automatically generates power failure protection. other instructions: When the overload device is started, the overload red light is on, and the body is stopped. You must turn the power back on before the machine can run. ***To replace the shaft, please press the "Digital Video" button on the right side of the picture. |
|
|
|
Content |
|
Weight : about 1 kg Applicable grinding head: Two models, L - for large-size shaft 1/8", S- for small-size shaft 3/32". *Maximum speed: 24,000 rpm / minute, adjustable speed, and selected forward and reverse (clockwise). (with one shaft and 6 abrasive cloth grinding heads) * This machine has an overload protection device "overload" warning, which can protect the machine and extend the service life of the machine. |
|
|
|
Other |
|
Warning:
1. Keep children away.
2. Keep work area clean.
3. Don't force tool.
4. Avoid accidental starting.
5. Before connection the tool. To a power source, be sure voltage supplied is the same as that specified on the nameplate of the tool.
6. Keep your hand. Do not touch the bit or collet after use.
7. Always hold the tool. Firmly in your hands during the star-up. The reaction torque of the motor, as it accelerates to full speed, can cause the tool to twist.
8. Remove adjustting keys and wrenches. Form habit of chucking to see that keys & adjusting wrenches removed from tool before turning it on.
9. Keep away from water and fire. |
|
|
|
|
|