|
1Press and hold the ?謜æ?sh Button?? Release the nut with the attached wrench, insert the appropriate size sleeve, and insert the grinding rod, Adjust to the appropriate length, then lock with the wrench. Press and hold the "latch button",
Use your hand to loosen the clip, insert the grinder, and then tighten it with your hand.
2 Do not touch the latch button during use
|
|
Precautions:
1. Keep a safe distance that children can't touch.
2. Please keep the environment clean.
3. Do not apply pressure to the product with improper external force.
4. Prevent accidental startup.
5. Make sure the voltage volts of the socket match.
6. Do not touch your hands after using the product.
7. After the product is plugged in, please make sure that it does not leave your hand. Because of high speed, it may cause distortion of the tool.
8. Before using the product, it can be adjusted by the wrench. When using it, please remove the wrench and tools.
9. Please stay away from water and fire.
10. Use goggles to prevent dust and dander from being used.
11. The grinding head and runner may wear out due to excessive rotation speed. Please rotate down and replace the new shaft and grinding head.
12. Enjoy a three-month non-human damage warranty period.
Maintenance:
Please always wipe with a soft cloth or air compressor to avoid excessive dust entering the body, resulting in unsmooth operation or damage. |